|
Phantom Delay is a tempo-driven delay effect with
a classic analog sound. Simply set the tempo of the song, and select desired
delay time. This delay provides three separate channels:
Channel controls
|
 |
The
On/Off Button, resembling an LED, can be used to switch a channel on or off.
When a channel is switched on, a marker become green.
The Delay knob shows how long delay is set to (from 1/48 to whole note).
|
 |
Using the Pan control, you can pan the channel to the center,
or spread the channel out across the stereo field (left, center, right).
|
 |
Gain controls set the levels for each channel individually.
|
Common controls
|
 |
The Tempo control allow you set tempo (from 60 to 300 BPM)
and select Meter (3/4 or 4/4).
One very important thing to remember about the
Tempo control: Beats Per Minute always refers to the quarter note.
|
 |
Frequency knobs allows you to adjust the filter's center
frequency. The High Pass filter has a range from 20Hz to 4kHz while
the Low Pass filter has a range from 180Hz to 18kHz.
Click on the LED-button to switch the filter on or off.
|
 |
The Dry/Wet knob allows to adjust Dry/Wet ratio.
|
 |
The Feedback knob controls how much signal is fed back into
the input.
|
 |
Gain is adjustable by the Output knob from -15 to +15dB, in 0.3dB steps.
|
Presets
|
 |
Push the button for select a preset.
|
 |
Click
to the preset name for renaming the preset.
|
 |
"Factory
Setting" is the default setting (reset) for all factory presets.
Each factory preset provides a good starting place for some fun.
You may use User's presets for setting any parameter you want.
The "Factory Setting" menu item doesn't reset user's presets.
|
 |
You
may copy the selected preset into other preset by clicking the Save button.
|
Service menu
|
 |
Click the "i"-icon for enter to the Service menu.
|
 |
Shows version of the plug-in.
|
 |
Opens this site.
|
 |
Opens
the registration window.
|
Sound examples
|
 |
Mister Sax
|
| |
Crazy Solo Guitar
|
Buy, Download & Install
|
  |
Phantom Delay Ver.1.0a DEMO
|
 |
If you wish to use
full version of Phantom Delay VST, you need to purchase the license.
Upon receipt of your registration fee you will receive an email containing
all necessary instructions, so please just follow them.
Please specify a valid email address when buying the licence, as it will be
used to send you the key.
|
 |
To
download full version of the plug-in visit the Support page.
If you have a question please read our FAQ.
|
 |
Install
Simply copy the DLL-file to your host software default VST folder
and activate it.
You do not need activate the demo version of any CPrimeLab software product.
|
